This easy farmhouse Christmas wreath was so easy to make and I used all items I had on hand. It’s simple to make in 15 minutes or less!This post may contain affiliate links.
You only need a few items to create this simple farmhouse Christmas wreath. I’m so glad to be participating in Craft Lightning for the holidays. To see my other Christmas wreath I created for Craft Lightning, click here.
You’ll want to spend the few extra dollars to get a green wreath form. I didn’t think that far ahead and just decided I could easily spray paint it. Don’t. The paint eats the foam and it turns sticky. I knew this but I didn’t think very far ahead. I used a 12″ wreath form that I picked up from my local Joann store.I also grabbed these wire garlands. For a wreath form this big, you’ll use all of one and a bit of the second. Just grab a smaller wreath form and you’ll only need to grab one wire garland. I began by hot gluing all the moss on the wreath form. I used what I had on hand but if I was going to buy the moss, I’d pick the moss ribbon or something that comes in a sheet rather than the small bits of moss. I used 2 full packages of the small moss.Just find random places to fill in the wreath and get a good covering. It doesn’t need to go all the way to the back because that won’t show. Just cover the wreath form as full as you want it.To wrap the wire garland, start with the wire in the back of the form. Wrap it all around the form in the clockwise direction. When the wire intersects, begin wrapping it around the opposite way. This will help the X’s form in the wreath. The tighter you wrap, the more definition in the farmhouse Christmas wreath you’ll get.That’s it! So easy and fun to create this farmhouse Christmas wreath and bring the look into your own home.
Check out all the other Craft Lightning projects below and follow along for more quick holiday crafts.
This mermaid doll was so easy to make and it was all thanks to my Cricut Maker. I used the rotary blade with the fabrics and the felt and it cuts so smooth. The darts are all included and you can choose if you want the pen to do the markings.
I chose to do the markings on the face so that I could do the embroidery on it. I just used a simple backstitch to complete the eyes and lips. The flower was easy to assemble as well. I used the purple felt that comes in the felt sampler pack from Cricut. I like the Cricut felt because it is stiff. You can get a good clean cut from it and it doesn’t slide on your mat. I’ve cut different brands of felt on my Maker and I do like the Cricut felt best. Some wool felt I had would move as I was cutting or when I peeled off the mat, the entire piece of felt fell apart. It’s all trial and error when you’re cutting materials on any machine though.To assemble the mermaid doll, follow these instructions. assemble the front of the doll and then the back of the doll. Sew them together right sides facing each other and then leave about 3-4″ on the tail. Stuff your mermaid pillow doll with some pillow stuffing or I just used few snow that I bought on clearance years ago, works just as good for stuffies. Now whip stitch the opening closed. Now you can attach your flower to your doll and you’re done.
This mermaid pillow doll was a lot of fun to put together. It’s the first time that I let my daughter pick out coordinating fabrics and that was a hard thing to give up. She loves her personalized mermaid doll and loves that I loved to make it for her. One day I’ll let her use my sewing machine…one day.
This is the perfect classroom Halloween craft to create for your childs Halloween party. Create these different spooky suckers using napkins and Tootsie Roll pops. Thank you to Oriental Trading for sponsoring this post.
This post may contain affiliate links.
I love helping in my kids’ classrooms but I especially love class parties. Halloween is always one of the best and I’m always looking for an easy craft to make with all the kids. What more do kids need on Halloween than candy? More candy! Last year we made cotton ball ghosts and ran out of cotton balls. This year I want to be extra prepared so I got 200 suckers and 150 napkins to make sure I don’t run out of supplies. Do you think I’ll have enough? 😉
We’ve all seen those ghost suckers that are super easy but I wanted to add more characters. I decided on a witch and a bat. I’ve cut all the shapes out with my Cricut Maker but I’ve also included a template down below so that you can easily make them without an electronic cutting machine.
To begin, tie all the napkins around the suckers first and attach a twine string at the base of the sucker to hold it on.Next, draw some faces. I wanted to keep it simple so I just drew an open mouth and two small eyes on the ghost. With the witch I tried to attempt a nose with a wart. Just use a fine black pen for these images. For the bat I drew some fangs using a silver marker so it would show on the black napkin.You’ll now want to assemble your witch hat. If you’re hand cutting these, don’t worry about the middle area of the base of the hat. Just place some glue on the tab and roll your hat into a cone. Now adhere it to the base. If you have the tabs, just place glue on each one and fold it under the cone.For the bat wings, just place some hot glue on the edges of the wings and place them on the sides of the sucker.You can easily have the kids cut out the shapes but for a class of almost 30 students, cutting ahead of time is a lot easier for me. Or you could just trace them beforehand as well.That’s it, the easiest kids classroom Halloween craft using suckers and napkins. Make one or make them all! Happy Halloween!
I’ve created a few files for the different images for these bags and you can find the Design Space link at the bottom of the post. For Iron-On Vinyl, the main thing you want to remember is to mirror your image. That is where I make the most mistakes when I’m creating anything with Iron-On.
Cut out all your shapes using your Cricut or if you’re really adventurous, find an image online and cut it by hand. You’ll next want to peel away any of the negative space on your image. Leave what you want your image to look like on the carrier sheet for easy application. If you by chance accidentally peel away what you wanted you can try to either stick it back on the carrier sheet or you could just place it down on your material and then place the carrier sheet over it before pressing it.Next, warm up your iron or EasyPress. I have had a lot of issues with peeling when I’ve just used an iron in the past. It doesn’t quite do the trick and that is because it has an uneven heating surface. The EasyPress has by far been one of the best tools I’ve used and its small which makes storage a breeze. For the Lite Iron-On I used the press at 305° for 30 seconds. For the Glitter Iron-On I used it at 325° for 30 seconds. You’ll then want to lay down a towel that is folded in half. Lay your surface over the towel and use the EasyPress to warm up your canvas bags. Lay your image over the warm surface and place the EasyPress over it. Hold down the EasyPress with some pressure and press the green Cricut button to begin the countdown.Once your image has been pressed, go ahead and peel off the carrier sheet slowly. If you have any pieces that may have not stuck, just press them again. Voila! You’re done and your kiddos are going to love their own personalizes DIY Halloween Trick or Treat Bags.
Have you ever wanted to create your own Cactus Pumpkins? In this post I will show you how easy it is with just a few supplies. Be sure to read until the end to find out how to enter to win your own Cricut Maker and a $75 gift card from Oriental Trading. (Giveaway has ended)This post does contain affiliate links. Thank you to Cricut and Oriental Trading for sponsoring this post.
I get to give away two Cricut Maker’s this week! To check out the first post, go here and for the second opportunity, don’t go away! This post is all about making homemade Halloween decor with your Cricut Maker and using pumpkins I got from Oriental Trading. These are super simple and can be customized to any colors of your choice.
Begin by painting your pumpkins. I just did random colors on random sizes with foam brushes.While they are drying, create your flowers and spikes in the Cricut Design Space files I linked to above. I used hot glue and glue dots to adhere to them each other. When cutting, use the intricate cut cardstock setting. This will double-cut the paper and give you a good crisp cut. Sometimes I did have it cut two times but this is when my mat was starting to lose its stick.When creating the stamens, you’ll begin by rolling the edge that doesn’t have the tab. Once you’re stamens are rolled, you’ll fold that tab under and secure it with some glue.I did about 3-4 layers of the green paint on all the pumpkins and I also painted the stems. Adhere the flowers and cactus arms with hot glue.For the spikes, cut your file on the holographic vinyl setting and just apply them randomly with your hands. No special tools needed for this easy pumpkin.These cactus pumpkins are perfect for Halloween and I love how colorful they are. Sometimes Halloween is too black and white so it’s nice to have a different color thrown into the mix.I’ve also teamed up with other bloggers to show what else you can make with your Cricut Maker and items from Oriental Trading. These two companies are a match made in heaven and the possibilities are endless.
School starts before we know it, grab this free back to school printable and make all your teachers dreams come true. This post contains affiliate links. Thank you for your support.
I can’t believe school starts in a matter of days for some and a few weeks for others. I love when my kids are in school, I’m not gonna lie. Teachers are my saving grace and I love everything they do and teach my children. I often wonder if they’re doing a better job than I am.
I made this printable using my iPad Pro and iPencil along with the Pro Create app. Super easy and the smoothness you get from the iPencil is amazing. It was definitely a high purchase item for me but I’ve found many uses for it so far.
I also grabbed some Neon Crayons from Amazon and just tied a cute ribbon so that it’d be secure on the box. Took me 5 minutes total once I printed out my file, cut it and secured it.
This twin baby shower was so exciting to throw for a dear friend of mine. She was expecting a boy and a girl so the neutral pastels were a given to the theme.This post contains affiliate links. Thank you to Cricut for sponsoring this post.
I love a good baby shower but I love it even more when my friends are having babies and I can help throw a baby shower. My friend, Lisa, is expecting twins! A boy (who we’ve dubbed as Sample) and a baby girl whose name is yet to be determined. I like it even more when I get to use my Cricut and make the decorations for someone I know that will appreciate them. Lisa is super crafty and so I knew I had to go all out so that I’d make her jealous, lol. I’m going to show you my creations for our twin baby shower that I made with my Cricut Explore Air 2.Of course I had to gift the babies these adorable Freshly Picked moccasins and I had to tie in the onesies to make a complete outfit. I also used the Sorbet Cardstock pack that is available on Cricut.com so all my color inspiration came from that one pack that included 6 different colors. So perfect for a twin baby shower.We decided to do a really simple menu that was just small finger sandwiches, fruit and a few desserts to choose from. For the drinks we did a sparkling lime-aid and some simple water with lemons in it. We served them in our drink holders that I got from Oriental Trading.I used a lot of the Print-then-Cut method for my labels on the onesie boxes and the popcorn bags. I’ve included the cut files at the bottom of this post that are available through Design Space. I used the font Lemon Tuesday so you’ll need to download that first. For the boxes I had some circles cut with the white glitter cardstock and placed the printable vinyl on top with the “Oh Babies” image to tie in the twin baby shower theme.
I just bought some clear cellophane bags and twine and filled it up with some popcorn and adhered the printable vinyl. I’m not going to go crazy for a favor when everything else is just too much. It’s the perfect ending to a fun night. If you’re ever in Salt Lake the best store to find all the paper and party supplies is called Pak-N-Wrap. This is also where I got the funky crepe paper banners. I know it has a name but I can’t remember what it’s called. By far the biggest project that I undertook was this banner. It was actually quite easy once I got all the pieces assembled.
Once they’re assembled, just start placing them on the foam half circles. I did place my dowel in beforehand so that I knew where I could get the flowers in a better position. I just put a ton of hot glue where the dowel was and let it set before i placed all the flowers.
Once your half circles are dry and assembled, you can add your banner. To assemble the banner, place the foam adhesive spray on your base paper and lay it on to the foam board. I used a special heat knife to cut the foam so I’d get a smooth edge, you can easily use a sharp knife. Just trace around the image and you’ll have the 3D design you desire. Once you have that all set, you can add the details to the banner. I added an extra peony to the banner as well to tie it in to the base. i put foam dots on the words and attached those last.
Here are the files that link you to the images on Design Space.
I was invited to participate in the Cricut Party Blogger Program Kickoff.
This experience is based strictly on my opinion. Others may have a different opinion or experience with the product listed above. I was provided the sample free of charge by the company or PR agency and I have given my honest opinion.
This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.
Learn how easy it is to personalize Easter eggs using your Cricut Explore and the Print then Cut method in Design Space. This post does contain affiliate links. Thank you for your support.
This is such a fun and easy way to personalize Easter eggs using your Cricut Explore. Just use the Print then Cut feature and you’re set. I grabbed some eggs from the Dollar Spot at Target and then the wheels started turning.
I like to use the printable vinyl when I’m putting the stickers on a non-flat surface because it’s thinner and more pliable.Once you’ve opened the Cricut file with the images already sized for you, select Go. It will bring up a print and mat preview and then select Go again. Go ahead and load your printable vinyl into your printer and then select that green print page button. The print prompt screen will show up and go ahead and print the paper like you normally would a regular image.Load your printed vinyl onto a mat and set your smart dial to vinyl. This will give it the perfect kiss cut that all stickers need. Once your mat is loaded, select the go button and the Cricut will now start reading your registration marks and then it will begin cutting.Unload your mat and get your eggs ready. Just peel and stick the stickers right on there and you’ll have the perfect personalized Easter eggs to enjoy throughout the holiday. And since they’re plastic, you can enjoy them next year too!