Tag Archives: Home

Cricut - Home DIY

Cool Gaming Wall Art, Perfect for Teens

December 12, 2018

My teenage sons are too cool for me anymore. They’re obsessed with Fortnite and so I decided to make them some cool gaming wall art that they can hang from their room with pride.
Check out the easy tutorial below. 

This post contains affiliate links. Thank you for your support.

Supplies for your Video Game Wall Art

Begin by unwrapping your frames and cutting about an inch off the edge of your Wild Whispers scrapbook paper. Use some tape to center your image on the mat and then go ahead and put the backing back on the frame and close it up.

Then out of your black cardstock, open up the Design Space file above and cut out the gaming art pieces. Run the cut video game art pieces through your Xyron Creative Station and then adhere them to the front part of the plexiglass to the frame.  I used the repositionable cartridge for my Xyron because I wanted to make sure I could get the artwork lined up straight. Placing straight items, in this case, was not my strong suit. 😉 three frames with video game artUse your Command Strips and put them in the upper corners of your frames and then line them up on your wall.

That’s it! These gaming art pieces were so easy to create and it’s perfect for any teen room decor.  desk with video game artwork

Cricut - Home DIY

Messy Hair Don’t Care Hoop Art with Cricut

May 3, 2018

To celebrate the beautiful Cricut Wisteria Explore Air 2 Bundle, available exclusively at JOANN stores, I’m making this super cute Messy Hair Don’t Care hoop with Cricut to display in my daughter’s room. Not only does she have messy hair, she has a messy room which coordinates perfectly.Create the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #Vinyl This post contains affiliate links. At no additional cost to you, I receive a small commision. Thank you for your support.

Cricut’s holographic sparkle vinyl has the perfect ability to catch different tones in the light. It’s a lot more vibrant than their glitter vinyl, which has it coordinating with the Cricut Wisteria Explore Air 2. Everything Cricut related that you need is included in this amazing bundle and you’ll have an amazing hoop art project in no time.

Supplies –

Usually, when you buy canvasses at JOANN, they come in a pack of 2 or more which is more economical. I just took a utility knife and removed the canvas material from the frame. It’s similar to what I did when I made my reverse canvas.Create the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #Vinyl Next, you’ll cut your design for your hoop art with Cricut Design Space. I designed it and sized it to fit a 9″ wooden embroidery hoop. Remove the excess Cricut sparkle vinyl and keep the words on the white paper.Create the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #Vinyl Lay your transfer tape over the top of your vinyl and use your XL scraper tool to rub over the top. Peel off the transfer tape and that will also remove your vinyl from the white carrier sheet. Lay it on the center of your canvas material. You’re going to want to peel slowly as you remove the transfer tape.Create the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #Vinyl You could easily use your EasyPress and use Iron-On Vinyl to do this same technique but I love the look of the pink sparkle vinyl and that’s what I had that was included in the Cricut Wisteria Explore Bundle. They also have silver and gold in the Iron-On in the same sparkle included in the box.Create the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #VinylCreate the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #Vinyl After your image is on the canvas, go ahead and lay the material over the bottom of the hoop and then lay the outer circle hoop and push down to secure it completely. After it’s secured, use some scissors and cut away the excess canvas material.

Add a cute ribbon on the top to hang or use a Scotch wall hook and hang it inconspicuously. Create the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #VinylI love how this is displayed with these coordinating felt balls and this adorable planter with fern leaves as the hair. It literally has messy hair and it doesn’t care 😉

I love using my Cricut Explore because of the Bluetooth capability. I often use it in conjunction with my Cricut Maker and it’s a pretty little thing sitting nice and cosy with her sister. The Wisteria color is a favorite of mine and it coincides with Pantone’s color of the year, Ultra Violet.

So you want to know what’s included in the Cricut Wisteria Explore Bundle?

  • Wisteria Explore Air 2
  • Wisteria XL Scraper and Weeder
  • Holographic Sparkle Vinyl in pink, teal and purple
  • Iron-On in gold and silver
  • New Foil Embossed Paper in pink and silver (for all your paper crafts)
  • SportFlex Iron-On

Create the cutest hoop art using your Cricut Wisteria Explore machine, available exclusively at JOANN stores. Use Cricut Sparkle vinyl to create the perfect shine. #CricutWisteria #ad #Cricut #CricutMade #Vinyl

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

Christmas - Holidays - Home DIY

How to create a Christmas designer garland

December 4, 2017

Decorating for Christmas is one of my absolute favorite things to do. I’m going to show you how to create a Christmas designer garland using all items I found at At Home.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.This post is sponsored by At Home and all opinions are mine.

I grabbed a few garlands at At Home and that is one of the keys to getting a designer garland, use more than one. I chose the 9’ Berry and Pinecone garland and then a simple 9’ Canadian Pine garland. Before fluffing the branches out, twist them together. You’ll want to find your center point and then fold it in half.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.Above my window in the kitchen, I have two screws that I just leave in year-round. I used my center point and found the center of my window and then I just looped the garland around my screws and then it hung evenly on both sides of the window. I do that for my front door garland as well. Once I have it hung I begin to pull out each branch to make it a fuller garland.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.I start with the ribbons next. At Home has such a great choice of ribbons and all of them match other decor so that it can coordinate with whatever ornaments and picks you choose. I chose two types of ribbons. I chose a green mesh that has a hint of sparkle in it but it still looks rustic and then I chose a woven red ribbon. They were each 4” wide and make the perfect swag. I take the ribbon and then take a wired branch from my garland and wrap that around the ribbon. It bunches it together and then I do that about every 12-15”.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.Next, use your floral picks. For this Christmas designer garland, I found some pinecone picks to match the cones in the Berry and Pinecone garland and some glittered berry picks. I pulled them apart so that for every pick I’d get about 2-3 pieces. Don’t be afraid to do that when you’re creating your garland. You don’t want things in one area and then the rest of your garland missing out. You’re easily able to hide the messy parts with the garland. You’re able to just take a branch and manipulate it to how you want it and hide any messes.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.Now I grabbed these heart and pinecone hanging ornaments. I chose to hang a few from the side but since they have such a great design to just hang, I chose to put others towards the top and have them hang over the window rather than inside the garland. They have such a free shape so I didn’t want to force what they decided to do.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.Now for the final touch. I found these great winter homes that light up but they’re meant to just sit on a mantle and not hang. They have two holes in the sides of the houses so I threaded some floral wires through those holes and twisted them in the back. I then put them near the corners of the garland and twisted it around the middle of the garlands so I’d get a good secure hold.

Making a Christmas designer garland is so much easier than you think. With At Home you’re able to get all your decorations at a great price and achieve this look in less than 30 minutes. To find your nearest At Home store, click here. At Home does not offer shipping yet so you’ll need to find a local store.Create the perfect Christmas designer garland. Its the perfect addition to all those Christmas decorations.

Home - Home DIY

How to clean tile grout with Borax

August 29, 2017

This shop has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #BoostWithBorax #CollectiveBias

Have you ever tried to clean your tile grout using Borax? I’m going to show you how easy and
effective it is.
How to clean your tile grout with Borax
Have you ever used 20 Mule Team® Borax for your cleaning needs? I have always used it to clean my tile grout and it’s such a great booster. For this post I’m going to show you how easy it is to clean tile grout with Borax.How to clean your tile grout with BoraxI grabbed some 20 Mule Team® Borax from my local grocery store, Lee’s in the “additives” section of the laundry aisle, and just mixed it with some baking soda. Follow the recipe below to create your paste and get scrubbing.

  • 1/3 cup 20 Mule Team® Borax
  • 1/2 cup baking soda
  • hot water to form a paste
  • toothbrush or grout cleaning brush

Once I mixed the mixture up into a thick paste, I slathered it onto the grout lines between my tile and let it sit for a minute or two. If your paste starts to become non-pliable, just add more water to continue with a paste consistency.How to clean your tile grout with BoraxAfter it sat for a minute, I began to scrub with a non-important toothbrush. The dirt lifts up almost immediately. 20 Mule Team® Borax is such a great booster and it helps in the cleaning process and makes it a little bit faster. Not only can you clean your tile grout – it can help you remove mattress odors and even help you clean your silverware. So many options with Borax.How to clean your tile grout with BoraxAs you can see the paste should last you almost your whole floor. You can reuse the dirty paste if you’d like or just mix up a new batch. I used a lot of paste and you don’t have to use this much if you don’t want. How to clean your tile grout with BoraxWhen I chose this tile and grout, I was not thinking clearly. I didn’t think how dirty it would become just after a short while. We’ve lived in our house for almost 10 years and I’ve had the tile professionally cleaned with no result ever coming into comparison for the Borax method. How to clean your tile grout with BoraxIt does take a bit of elbow grease but the fact that the grout is now the same color it was 10 years ago is a miracle all in of itself. I won’t clean my grout any other way now. Even though it is commonly used in the laundry room, there are so many other ways to use Borax. I especially like to use it to help clean my cast iron sink. What are some of the ways you plan on using Borax to help you in your home?

Home DIY - Round Ups

Get the Fixer Upper look from World Market

April 27, 2017

Have you wanted to get the Fixer Upper sytle in your home but don’t know where to start?
World Market is a great resource to get the farmhouse look.
Get the best farmhouse items available at World MarketThis post contains affiliate links. Thank you for your support.

I love the Fixer Upper Style and what I love most about it is the industrial meets farmhouse style. World Market is an excellent place to get all your Fixer Upper style needs so I’ve rounded up some of my favorite Fixer Upper items. Just click on the photos and it’ll take you to the item.Stripe kitchen towel Round Evan Mirror Nihal Baskets Gulianna Collection Gray wash clockGlass pie sign Lavendar WreathCorrine Chandelieraccordian light 3-TIER GLASS DRYING RACKCharlotte tote basketAmelie cake stand

Again, World Market has some of the funnest things around when you’re looking to implement the Fixer Upper style in your own home. What’s your favorite Fixer Upper item?

Cricut - Home DIY

Make your own Fixer Upper style Kitchen sign with your Cricut Explore

March 27, 2017

Fixer Upper is one of my all time favorite HGTV shows. Learn how easy it is to create this Fixer Upper style sign for your kitchen using your Cricut.Create your own Fixer Upper style sign with your Cricut ExploreThis post contains affiliate links. Thank you to Cricut for sponsoring this post.

Materials

magnolia homes kitchenFirst, begin by downloading the Kenzo font for free and use this pre-made Cricut template for your Fixer Upper kitchen sign. Everything is done for you. Just load your black vinyl onto your 12X24″ Cricut mat and select Go! You’ll want to use a standard blade for the vinyl and I used the Vinyl+ setting on my smart dial just to be sure I got a smooth cut. My German blade has lasted 2+ years and I’ve really never had to replace it. Once I start getting missed cuts or tears in my paper, that’s when I know it’s best to change my Cricut blade. It’s super easy, just press the button on the top and pull out the blade, throw the new blade in there and release the button. It’s so easy!After I’ve cut my vinyl, I’ll use the hook tool as a weeder and remove all the negative space. I then add my transfer tape on top of it and give it a good scrape using my scraper tool or a credit card will work just as well. Be sure to use quite a bit of pressure so that the image will lift easily when you’re ready to pull up the image.Prepare your wooden surface by sanding it lightly and then brushing off the dust remnants. I spray painted my sign black, to begin with, and then once I place the letters on it I’ll spray it white to reveal a reverse effect.

The pre-made template is just the right fit for the 3’X6″ wooden board. I had leftover wood so I just used that for the size. Whatever you have on hand or whatever size works for your space, be sure to edit the image so that it’ll look great on your board. I made the letters 5″ so that I had a bit of a white edge but I didn’t want too much of an edge because that doesn’t seem to be the look of the Fixer Upper kitchen sign that says SUPERMARKET.Now that I’ve weeded out my vinyl and attached it to the transfer tape, adhere it to your dry board. It’ll go on directly over the black spray paint. Use your scraper tool and be sure the letters are pressed down well. Lift off your transfer tape and begin to spray with white paint. My board had some imperfections and I loved that, If you want a cleaner look, paint at least 2 coats of white spray paint.After the white paint has dried, use your weeder tool and peel up the letters from the board. You should have crisp letters that are black and a white background. I used the scraper tool to rough my board up a bit. You could also use a metal spatula and just brush it along the edges and a little over the writing. Age that wooden board as much as you like or as little as you like.Adhere some foam mounting tape or some command strips and hang it above your kitchen sink. I love all the projects the Cricut Explore allows me to do and I’ve made so many different things for my home, my children and myself especially! Also, if you know me well, you know that I had to move everything out of the way to get a ‘clean’ shot of my home. There is crap everywhere and I have no space for anything. Do I throw it away or just buy a new house??

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

Christmas - Crafting DIY - Cricut

DIY Christmas Ornaments and Snow Village using my Cricut Explore Air

November 26, 2016

Make these DIY Christmas Ornaments using your Cricut Explore or use a simple holiday paper punch. Add it to clear ornaments and you have your very own customized Christmas ornaments.Create your own ornaments using your Cricut Explore and vinylThis post contains affiliate links. Thank you for your support.

I love Christmas and I love decorating for Christmas. Unfortunately this year I won’t be doing any of it. We’re off to the islands and we can’t wait. I do, however, have this mini red tree that I put up so I decided to make some DIY Christmas ornaments so that we can have an easy peasy Christmas. When we get home after the new year, the kids will have some presents underneath this tiny tree to come home too. I’m just glad it will be a little bit decorated.Create your own ornaments using your Cricut Explore and vinylSupplies:

Create your own ornaments using your Cricut Explore and vinylI began by cutting out the adhesive foil using my Cricut Explore (or if you don’t have one, just use a small paper punch). I double cut my shapes because I wanted to be sure that I had a good, clean release with the vinyl.

I next took each tree and folded the wire in half. I took off the tops of the ornament and used my tweezers to hold onto the tree. I dipped the wire into some hot glue and pushed it into the hole in the ornament. I held onto the tree for about 60 seconds so that it would hold straight once I let go.Create your own ornaments using your Cricut Explore and vinylI used a small funnel to get the snow paper into the ornament. I had to use my tweezers to help push through the paper because it was all different sizes and so I made a huge mess. I chose this snow paper because of the iridescence. I then placed the top of the ornament back on and held onto it while I prepared my foil.Create your own ornaments using your Cricut Explore and vinylI peeled the backing off my adhesive foil and placed three snowflakes on each ornament. I’ll probably end up putting some ribbon on the orbs to add some dimension. Create your own ornaments using your Cricut Explore and vinylI made this paper Christmas Village using grey and red paper and then placed the adhesive foil snowflakes to add an ornamental detail. diy-ornamentsTo get more ornament inspiration, visit these other bloggers and see what they made! Marry Christmas!


Crafting DIY - Cricut - Scrapbooking - Thanksgiving

DIY Fall Paper Leaf Wreath with Cricut

October 14, 2016

*This post does contain affiliate links. Thank you for your support.diy-paper-fall-wreathI’m happy to be joining in with other bloggers to share with you our #FallCricutChallenge using some of Cricut’s newest products. I decided to make a DIY paper leaf wreath using my Cricut Explore and it turned out better than I could ever imagine.Create a DIY Fall leaf wreath using paper and you CricutI used the metallic pearl paper and cut leaves like crazy. You can get the cut file here and it includes three leaves. If you don’t have Cricut Access yet, get it. It is so worth it. You have access to their amazing shapes and fonts to use at your leisure. I like this program because you’re not limited to a certain amount each month and you can use what you need and it’ll be worth it because you may just have to use it once. Create a DIY Fall leaf wreath using paper and you CricutI started by separating my shapes and then I sporadically started gluing them on my wreath base. I started with the larger leaves first so that I could get some coverage. Had I really thought ahead, I would have spray painted my wreath form prior to putting on the paper leaves. Create a DIY Fall leaf wreath using paper and you CricutOnce you have it all filled in to your satisfaction, add some paper wheat stalks and make sure they stick out kind of crazy because the crazier, the better. Grab the cut file here.Create a DIY Fall leaf wreath using paper and you Cricut

I’m excited to join 22 other super talented bloggers for the Fall Cricut Challenge. Check out what these talented ladies created below and enter to win a HUGE box of supplies from Cricut!

fall-cricut-challenge-square-main

DIY Faux Leather Jewelry from It Happens In A Blink

DIY Trick or Treat Bags from Housewives of Riverton

Easy Triangle Garland from Our Thirfty Ideas

Fall No Sew Buffalo Check Pillow from Lydi Out Loud

Brand Sparkling New Onesie from Tastefully Frugal

Cinderella Pumpkins from Auntie Tay

DIY Halloween Pillow from The Happy Scraps

Falling For You Shirt from The Quiet Grove

Faux Leather Flower Clips from 5 Little Monsters

Something Wicked This Way Comes Banner from Albion Gould

Blessed Flower Arrangement from Crafting In The Rain

Squad Ghouls Halloween T-Shirt from Housewife Eclectic

DIY Leather Bows from Artsy-Fartsy Mama

BOO Halloween Headbands from RaeGun Ramblings

DIY Flower Skull From Cloudy Day Gray

Kids Thanksgiving Graphic T-Shirts from Over The Big Moon

Faux Leather Floral Cuffs from Hello Creative Family

Fall Paper Leaf Wreath from Frenchie Wraps

Glitter Apron from Midge and Madge

DIY Fall Mantel from Major Hoff Takes A Wife

Halloween Party Props from Nite Owl Creates

Disney Savings Jar from Inspiration Made Simple

DIY Farmhouse Sign from A Southern Mother

Want to make one (or all) of these projects? We’ve teamed up with Cricut to help with that! Enter through the widget below to win a HUGE box full of supplies including:cricut-supplies

Variety 3 Pack of Cutting Mats

Premium Cutting Blade

Seaside Pen Set

Pearl Paper Sampler

Poster Board Brights Set

Glitter Vinyl Sampler

Printable Vinyl

Patina Pebbled Faux Leather Sampler

Black Iron On Vinyl

Glitter Gold Iron On Vinyl

Giveaway is open to residents of US and Canada ages 18+. Giveaway ends on 10/21/2016 at Midnight MST. Winner will be notified within 24 hours and has 24 hours to respond.