Baby Showers - Cricut Crafts

Throw a Twin Baby Shower and decorate with your Cricut Explore

May 22, 2017

This twin baby shower was so exciting to throw for a dear friend of mine. She was expecting a boy and a girl so the neutral pastels were a given to the theme.Twin baby shower ideas using cricutThis post contains affiliate links. Thank you to Cricut for sponsoring this post.

I love a good baby shower but I love it even more when my friends are having babies and I can help throw a baby shower. My friend, Lisa, is expecting twins! A boy (who we’ve dubbed as Sample) and a baby girl whose name is yet to be determined. I like it even more when I get to use my Cricut and make the decorations for someone I know that will appreciate them. Lisa is super crafty and so I knew I had to go all out so that I’d make her jealous, lol. I’m going to show you my creations for our twin baby shower that I made with my Cricut Explore Air 2.Green and Pink baby shower ideasbaby shower centerpiece ideasSample baby nameFreshly picked for twinsOf course I had to gift the babies these adorable Freshly Picked moccasins and I had to tie in the onesies to make a complete outfit. I also used the Sorbet Cardstock pack that is available on so all my color inspiration came from that one pack that included 6 different colors. So perfect for a twin baby shower table with cricutdrinks to serve at a baby showerboy and girl twin desserthow to decorate a dessert tableWhat to serve at a baby showerTwin baby shower dessert ideasWe decided to do a really simple menu that was just small finger sandwiches, fruit and a few desserts to choose from. For the drinks we did a sparkling lime-aid and some simple water with lemons in it. We served them in our drink holders that I got from Oriental Trading.twin baby shower with cricutTwin baby shower gift ideascricut onesie favor boxprint then cut with cricutTwin baby shower favor ideasI used a lot of the Print-then-Cut method for my labels on the onesie boxes and the popcorn bags. I’ve included the cut files at the bottom of this post that are available through Design Space. I used the font Lemon Tuesday so you’ll need to download that first. For the boxes I had some circles cut with the white glitter cardstock and placed the printable vinyl on top with the “Oh Babies” image to tie in the twin baby shower theme.

I just bought some clear cellophane bags and twine and filled it up with some popcorn and adhered the printable vinyl. I’m not going to go crazy for a favor when everything else is just too much. It’s the perfect ending to a fun night. If you’re ever in Salt Lake the best store to find all the paper and party supplies is called Pak-N-Wrap. This is also where I got the funky crepe paper banners. I know it has a name but I can’t remember what it’s called. How to make cricut flowersboy and girl twin baby shower ideasbaby shower dessert tabledessert table with cricutBy far the biggest project that I undertook was this banner. It was actually quite easy once I got all the pieces assembled.


  • Wooden Dowels
  • 2 Half Circle Styrofoam balls
  • sheet of Styrofoam
  • Styrofoam cutter
  • Adhesive Spray & Foam Dots
  • Paper

I cut the paper on the 12×24″ mat with the 12X24″ Sorbet paper sampler. Again, I used the Lemon Tuesday font and typed the saying “Oh Babies” and cut that using the White Glitter Cardstock. I cut a ton of the 3D Peony from the 3D Floral Home Decor cartridge and I cut them in various sizes and colors. I also cut additional leaves so that I’d have some smaller fillers. I recommend this cartridge because the flowers go together so easily.

Once they’re assembled, just start placing them on the foam half circles. I did place my dowel in beforehand so that I knew where I could get the flowers in a better position. I just put a ton of hot glue where the dowel was and let it set before i placed all the flowers.

Once your half circles are dry and assembled, you can add your banner. To assemble the banner, place the foam adhesive spray on your base paper and lay it on to the foam board. I used a special heat knife to cut the foam so I’d get a smooth edge, you can easily use a sharp knife. Just trace around the image and you’ll have the 3D design you desire. Once you have that all set, you can add the details to the banner. I added an extra peony to the banner as well to tie it in to the base. i put foam dots on the words and attached those last.

baby shower table with cricutHere are the files that link you to the images on Design Space.

Picture credit goes to the amazing Natalie at Beehive Photo.

I was invited to participate in the Cricut Party Blogger Program Kickoff.

This experience is based strictly on my opinion.  Others may have a different opinion or experience with the product listed above.  I was provided the sample free of charge by the company or PR agency and I have given my honest opinion.

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

23 thoughts on “Throw a Twin Baby Shower and decorate with your Cricut Explore

  1. Cindy Richter

    My oh My how baby showers have changed since I had babies! Everything is beautiful…now I want a Cricut machine! Found you on MMJ linky party – So glad I did!

  2. Christine

    OK I need to figure out how I can use those moccasins in my life, even though I am not having a baby. Those are flipping cute! You set everything up so beautifully. Thanks for sharing this at the Dishing It & Digging It Link party. Hope ya had fun!

    1. Lindsay Post author

      Thanks so much! Moccs are a must for babies! They do carry shoes for older kids too that are darling and well worth the money.

  3. Leanna

    It’s all very nice and unique, I bet your friend really appreciated it. She wouldn’t be jealous as its all for her. The banner is the best part and obviously worth the amount of work it took. Beautifully done.


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.