Spring is not complete without a DIY Toddler Easter Shirt for the cute babes in your life. Check out the FREE Easter SVG file and grab 15 more from our monthly free SVG blog hop.
This post contains affiliate links. Thank you for your support.
These monthly free SVG files myself and other bloggers have offered have been a huge hit with all of our readers. We’ve created everything from Christmas mugs, Valentine t-shirts, and cute tote bags all with our free SVG files.
Lay your HTV on the mat shiny side down. This carrier sheet will hold your entire image together for you. After you’ve cut, remove any unwanted HTV from the carrier sheet.
Prepare your toddler t-shirt for the HTV by preheating your fabric. This will remove the moisture from your fabric and allow the HTV to stick better and not lift.
Using a folded towel on a sturdy surface is perfect for pressing the HTV to your shirt. Do not use an ironing board. It is too bendy in the middle (that’s a term) and it doesn’t allow even heat to be distributed.
Follow manufacturers instructions on the heat settings so that you can be sure to get the right seal of the HTV.
That’s it! Grab the 16 FREE SVG files below from each blogger. These are available for personal use only.
Create a darling carrot favor box for Easter using your Cricut and some Xyron adhesive.This post contains affiliate links. Thank you for your support.
I’m so excited! Today is my first post with the Xyron Design Team. I’m going to be sharing two posts a month that is dedicated to them but in reality, most my projects include Xyron adhesive. Our theme this month is Easter and I loved creating this carrot favor box.
Begin by downloading the .svg file from Lia Griffith’s site. I have said this many times – her membership is so worth it. I get so many printables, cut files and inspiration from her. After you’ve cut the file, crease it at the score lines.Use your Xyron Mega Runner to apply the adhesive along the small fold and press the box together. Fill it with some goodies and tie with the ribbon. And I don’t know what it is but these egg shaped peanut butter M&M’s are 10x better than the original! I used these Crepe Paper Daisies in the photo too. They are also a file of Lia’s that I downloaded. I used them in a floral crown that I made for my daughter. Check that out here.Easter has never been funner than with this carrot favor box! They’re a new favorite craft of mine. Happy Easter!
I found some laminated vinyl at my locals Michaels near their small section of fabric. It came in a roll that is 12″x47″ and is perfect for laying it on my cutting mat. You can absolutely cut non-laminated burlap but I like this because it won’t fray after I cut it.Cut your pennant shapes out of the vinyl using the rotary blade and your pink fabric mat. I have used my other mats with my rotary blade and I haven’t had any issues. It may dull the rotary blade a little faster but I try to save the fabric mat for items that won’t leave a lot of fuzz behind.Next cut out your bunnies. You can use different colors of Iron-On Vinyl or just one color. Another fun material would be felt. Just back it with some Heat n’ Bond and use your rotary blade to cut it out as well. Since this design is essential the same, I didn’t worry about mirroring my image. If you do letters or words, be sure to mirror your image. But you do need to make sure that you place the Iron-On right side down on your mat.Use your EasyPress or your Iron to secure the image onto the burlap. Use it on the foil setting at 385°F for 25-30 seconds. Be sure to warm your burlap before to wick out any moisture that may be there. Moisture and applying vinyl do not go hand-in-hand.Now just weave your banner through some ribbon and hang. I like to add junque bows in between my letters so that they don’t bunch together and I can control the spacing.
I love this burlap Easter banner and it’s going to go up every year!
Making clay pot crafts is so easy and inexpensive. Use some metallic paint and create these farmhouse style clay pots filled with an easy arrangement of faux flowers.This post contains affiliate links. Thank you for your support.
Paint your clay pots using two coats of the metallic paint. Allow each coat to dry in between so that you reduce your brush strokes and any paint lifting.
Cut your faux flowers off into individual sprigs. You’ll want to glue the foam ball into the terracotta pot and then begin poking the foam balls with the wired faux flower sprigs.Arrange it to how you like and then display it wherever you desire. I placed mine on this farmhouse style shelf right outside my front door.
Be sure to check out the other clay pot crafts that bloggers did for this months Craft Lightning. –
Have you ever wondered what materials your Cricut Explore and Cricut Maker can cut? Today I’m going to show you how to create an easy easter bunny craft using a cereal box and your Cricut.This post contains affiliate links. Thank you for your support.
The new Cricut Maker has a setting that you can choose cereal box. It was insanely easy and all you need in addition to the materials that come with your Maker is the Deep Cut Blade. Click on the link to the Design Space file above and it will take you to the file to make this exact bunny and bow. Just size it however you want it.Begin by cutting all your materials. For the cereal box, I chose to have it do a double cut just to insure a clean cut. To do this all you have to do is not unload it. Once your image has cut just press the go button again. This will be sure that the lines are cut on the same spot. If you unload it and then try to cut it again, your images will not be cut exactly like before.I had some cotton balls on hand and just glued it to the tail area. I did the same with the cardstock bow. I used Cricut Cardstock in Rose and used the fine point blade and did a double cut as well.Just place your Easter Bunny craft wherever you want and it’s the perfect addition to your holiday decor. Check out what other bloggers have done using cereal boxes and their Cricut below.
Learn how easy it is to personalize Easter eggs using your Cricut Explore and the Print then Cut method in Design Space. This post does contain affiliate links. Thank you for your support.
This is such a fun and easy way to personalize Easter eggs using your Cricut Explore. Just use the Print then Cut feature and you’re set. I grabbed some eggs from the Dollar Spot at Target and then the wheels started turning.
I like to use the printable vinyl when I’m putting the stickers on a non-flat surface because it’s thinner and more pliable.Once you’ve opened the Cricut file with the images already sized for you, select Go. It will bring up a print and mat preview and then select Go again. Go ahead and load your printable vinyl into your printer and then select that green print page button. The print prompt screen will show up and go ahead and print the paper like you normally would a regular image.Load your printed vinyl onto a mat and set your smart dial to vinyl. This will give it the perfect kiss cut that all stickers need. Once your mat is loaded, select the go button and the Cricut will now start reading your registration marks and then it will begin cutting.Unload your mat and get your eggs ready. Just peel and stick the stickers right on there and you’ll have the perfect personalized Easter eggs to enjoy throughout the holiday. And since they’re plastic, you can enjoy them next year too!
Peeps Rice Krispie Treats are delicious but even better in Easter form. Use your favorite Easter Bunny cookie cutter and make these look like the real deal.
This post contains affiliate links. Thank you for your support.
Oh my gosh! These are so good and not too overly sweet. Our kids love these as a fun Easter snack. I’m going to show you how to create your own Peeps Rice Krispie Treats for Easter. Use the sugary marshmallow treats to create your own Peeps Rice Krispie Treats.
Supplies for your Peeps Easter Rice Krispie Treats –
Begin by melting one package of Peeps, 1/4 cup of butter and 2 cups of marshmallows. I used the microwave to melt the ingredients together and once it came out, I gave it a good stir. Next, add 2 cups of Rice Krispie cereal and mix it well. You’ll then pour it onto a 1/4 sheet pan. To press down the treats easily, wet your hands a little. It’ll make the mixture not as hot to the touch and you’ll have no marshmallows stuck to your hands afterward. Allow the mixture to cool and cut out as many bunnies as you can. I got 8 out of each 1/4 sheet pan.
Now take your black writing gel and place three dots to represent the eyes and the nose of the bunnies. Now they look just like giant peeps and taste delicious. You’re going to get more servings, obviously, if you just cut them into squares but it’s fun for them to be cut into mimicking bunnies to match the Peeps. Sometimes I find Peeps overly sweet because of the sugar coating so I’ve found that mixing them with more regular marshmallows makes them more tolerable to eat a larger amount. Who cares, it’s Easter and Easter is the perfect time to have Peeps Rice Krispie Treats.
This shop has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #KreateMyHappy #CollectiveBiasI’m so excited for Easter and another treat I love are Kellogg’s® Rice Krispies Treats. How fun are these Rice Krispies Spring Flowers? They were so quick to make and my daughter and I had a blast making them. All we needed were some additional mini marshmallows and M&M’s. Get your kids into the kitchen and start creating! Of course, you can’t start creating until you run to your nearest Target and get all the goodies first though…
So I grabbed a small biscuit cutter and cut some circles, really only the size of $.50 pieces. I placed some JET-PUFFED Miniature Marshmallows into a small microwaveable cup and nuked them for 20 seconds. This was my glue! I just dipped one end into the cup and them places the M&M’s into a flower pattern onto the Rice Krispies Treat.
So now you can create whatever shapes and letters however you’d like with Rice Krispies Treats because hey are having an awesome contest that everyone will be able to show off their creativity. Head on over to the Kellogg’s® Rice Krispies page for more recipes and inspiration. Check below for more details on the contest 😉
How to vote for entries and enter the sweepstakes:
To enter via Twitter, Pinterest and/or Instagram, go to any of the Social Platforms and include the hashtag #RKTreatSweeps and the name of the Treat recipe you’re voting on in the copy of your post.
You must also send or share a link of your post to [email protected] in order for your Social Platform entry to be verified.
To send or share a link of your post with the Sponsor, go to the Social Platform(s) containing your Treat vote post, go to your profile, select the tweet/pin/post you would like to share with the Sponsor, and copy the link (Twitter) or share the post (Pinterest & Instagram) to [email protected]
All Social Platform posts must be posted to a non-private Social Platform account, must include the Hashtag and link to post must be shared or sent to Sponsor using the email address noted above.
Limit one (1) entry per Week by voting using a Social Platform.
By using the Hashtag, you affirm that you have read, understand and agree to these Official Rules.